CenturionTM
Brand of MOLDED FIBERGLASS GRATING
1-1/2" x 6" x 1-1/2" Thick
(Rectangular Mesh)
The CenturionTM 1-1/2" x 6" is a unique pattern of fiberglass grating which is 1.5” thick in a rectangular mesh with bearing bars running lengthwise for efficient layouts, fabrication, and utilization. As a result of thicker bearing bars, the stiffness of the panel is also improved.
-
Resin systems available:
-
General Purpose-Polyester
-
Isophthalic-Polyester
-
USDA Certified
-
Vinyl Ester
-
-
Physical Dimensions:
-
Center-Center: 1.5” x 6.0”
-
Bar Height: 1.5”
-
Tie Bar Width: 0.5625”
-
Bearing Bar Width: 0.3125”
-
Open Area: 72 %
-
Panel Wt. (4'x12') (Men./Grit): 140/165 lbs.
-
Wt/sf (Men./Grit): 4.0/4.5 lbs./sf
-
-
Installation Notes: All fiberglass grating should be fastened to the supports using fasteners such as the CC-Clips described on this site. These should be used every 3’-4’ along the supports, with a minimum of four clips on small sections. The clips not only add safety for the employees using the grating, but also improve on the deflection.
Call for information or email: sales@centuryfrpgrating.com
140 Celtic Blvd. - Tyrone, GA 30290 - Phone: 770-632-7112 - Fax: 770-632-7115