CenturionTM
Brand of MOLDED FIBERGLASS GRATING
1-1/2" x 1-1/2" x 1" Thick
(Square Mesh)
The CenturionTM square mesh patterns of fiberglass grating have the advantage of cost for a one inch thick grating along with the fabrication advantages of the square mesh pattern. It is good for flooring, machine housings, fabrications and similar applications requiring strength in both length and width directions.
-
Resin systems available:
-
General Purpose-Polyester
-
Isophthalic-Polyester
-
USDA Certified
-
Vinyl Ester
-
-
Physical Dimensions:
-
Center-Center: 1.5” x 1.5”
-
Bar Height: 1.0”
-
Tie Bar Width: 0.25”
-
Bearing Bar Width: 0.25”
-
Open Area: 69 %
-
Panel Wt. (4'x12') (Men./Grit): 130/150 lbs.
-
Wt/sf (Men./Grit): 2.7/3.1 lbs./sf
-
-
Installation Notes: All fiberglass grating should be fastened to the supports using fasteners such as the CC-Clips described on this site. These should be used every 3’-4’ along the supports, with a minimum of four clips on small sections. The clips not only add safety for the employees using the grating, but also improve on the deflection.
Call for information or email: sales@centuryfrpgrating.com
140 Celtic Blvd. - Tyrone, GA 30290 - Phone: 770-632-7112 - Fax: 770-632-7115