CenturionTM
Brand of MOLDED FIBERGLASS GRATING
1" x 4" x 1" Thick
(Heavy Duty - Rectangular Mesh)
The CenturionTM 1"x 4" is a Heavy Duty 1” thick fiberglass grating. The bearing bars are thicker than other 1" thick patterns of fiberglass grating for greater load capacity and improved resistance to mechanical damage. The bearing bars run in the width dimension and should be mounted accordingly
-
Resin systems available:
-
General Purpose-Polyester
-
Isophthalic-Polyester
-
USDA Certified
-
Vinyl Ester
-
-
Physical Dimensions:
-
Center-Center: 1.0” x 4.0”
-
Bar Height: 1.0”
-
Tie Bar Width: 0.6875”
-
Bearing Bar Width: 0.3750”
-
Open Area: 65 %
-
Panel Wt. (4'x12') (Men./Grit): 175/200 lbs.
-
Wt/sf (Men./Grit): 3.6/4.2 lbs./sf
-
-
Installation Notes: All fiberglass grating should be fastened to the supports using fasteners such as the CC-Clips
described
on this site. These should be used every 3’-4’ along the supports, with a
minimum of four clips on small sections. The clips not only add safety for
the employees using the grating, but also improve on the deflection.
-
Deflection Data: Please select the table link to the deflection data for this pattern of grating.
Call for information or email: sales@centuryfrpgrating.com
140 Celtic Blvd. - Tyrone, GA 30290 - Phone: 770-632-7112 - Fax: 770-632-7115