CenturionTM
Brand of MOLDED FIBERGLASS GRATING
2"x 2" x 2" Thick
(Square Mesh)
The CenturionTM 2" thick fiberglass grating panels are specially designed for maximum stiffness and strength without excessive weight. The square mesh pattern also means efficient panel utilization and ability to handle loads in both directions. Ideal for longer spans or heavier loads. Bearing bars are also thicker than the industry standard of 0.25" for greater stiffness and greater resistance to mechanical abuse.
-
Resin Systems Available:
-
General Purpose-Polyester
-
Isophthalic-Polyester
-
USDA Certified
-
Vinyl Ester
-
-
Physical Dimensions:
-
Center-Center: 2.0” x 2.0”
-
Bar Height: 2.0”
-
Tie Bar Width: 0.3125”
-
Bearing Bar Width: 0.3125”
-
Open Area: 71 %
-
Panel Wt (4'x12') (Men./Grit): 190/215 lbs.
-
Wt/sf (Men./Grit): 4.0/4.5 lbs./sf
-
-
Installation Notes: All fiberglass grating should be fastened to the supports using fasteners such as the CC-Clips described on this site. These should be used every 3’-4’ along the supports, with a minimum of four clips on small sections. The clips not only add safety for the employees using the grating, but also improve on the deflection.
Call for information or email: sales@centuryfrpgrating.com
140 Celtic Blvd. - Tyrone, GA 30290 - Phone: 770-632-7112 - Fax: 770-632-7115