CenturionTM
Brand of MOLDED FIBERGLASS GRATING
Tread Panels
Fiberglass Stair Tread Panels are made to allow the fabricator or customer to cut treads to fit their needs at the site. The panels have a solid nosing down each long side and can be cut at 6" centers using the cutting guides.
The depth of the tread is controlled by the treads cut from each side:
Molded-in nosing
Non-slip grit surface
Thickness: 1.5"
Pattern: 1.5" x 6"
Panel Size: 120" x 22.75"
Double nosing on 120" sides
Available in GP, ISO, USDA, and VE
Embedded grit non-slip surface
Easily cut to size with full size guide bars to produce banded stair treads
See following page for tread deflection data:
Caution: ALL TREADS should be mounted on support angles attached to the stringers, and fastened down with at least four (4) "M" type hold down clips.
Call for information or email: sales@centuryfrpgrating.com
140 Celtic Blvd. - Tyrone, GA 30290 - Phone: 770-632-7112 - Fax: 770-632-7115